YYYY
MMM
Exceptional-point-enhanced sensing in an all-fiber bending sensor
全光纤弯曲传感器中卓越的点增强传感
全ファイバ曲げセンサにおける優れた点強化センシング
전광섬유 커브 센서의 탁월한 점 강화 감지
Excelente detección de mejora de puntos en todos los sensores de flexión de fibra óptica
Excellente détection améliorée par points dans les capteurs de flexion à fibre optique
Превосходная точечная сенсорная чувствительность в полностью волоконно - оптических датчиках изгиба
Zheng Li 李铮 ¹, Jingxu Chen 陈敬旭 ¹, Lingzhi Li 李凌志 ¹, Jiejun Zhang 张杰君 ¹, Jianping Yao 姚建平 ¹ ²
¹ Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, Guangzhou 510632, China
中国 广州 暨南大学光子技术研究院 广东省光纤传感与通信技术重点实验室
² Microwave Photonics Research Laboratory, School of Electrical Engineering and Computer Science, University of Ottawa, Ottawa, ON K1N 6N5, Canada
Opto-Electronic Advances, 12 December 2023
Abstract

An exceptional-point (EP) enhanced fiber-optic bending sensor is reported. The sensor is implemented based on parity-time (PT)-symmetry using two coupled Fabry-Perot (FP) resonators consisting of three cascaded fiber Bragg gratings (FBGs) inscribed in an erbium-ytterbium co-doped fiber (EYDF). The EP is achieved by controlling the pumping power to manipulate the gain and loss of the gain and loss FP resonators.

Once a bending force is applied to the gain FP resonator to make the operation of the system away from its EP, frequency splitting occurs, and the frequency spacing is a nonlinear function of the bending curvature, with an increased slope near the EP. Thus, by measuring the frequency spacing, the bending information is measured with increased sensitivity.

To achieve high-speed and high-resolution interrogation, the optical spectral response of the sensor is converted to the microwave domain by implementing a dual-passband microwave-photonic filter (MPF), with the spacing between the two passbands equal to that of the frequency splitting.

The proposed sensor is evaluated experimentally. A curvature sensing range from 0.28 to 2.74 m⁻¹ is achieved with an accuracy of 7.56×10⁻⁴ m⁻¹ and a sensitivity of 1.32 GHz/m⁻¹, which is more than 4 times higher than those reported previously.
Opto-Electronic Advances_1
Opto-Electronic Advances_2
Opto-Electronic Advances_3
Opto-Electronic Advances_4
Reviews and Discussions
https://www.hotpaper.io/index.html
Dynamic spatial beam shaping for ultrafast laser processing: a review
Aberration-corrected differential phase contrast microscopy with annular illuminations
Multi-resonance enhanced photothermal synergistic fiber-optic Tamm plasmon polariton tip for high-sensitivity and rapid hydrogen detection
Broadband ultrasound generator over fiber-optic tip for in vivo emotional stress modulation
Non-volatile reconfigurable planar lightwave circuit splitter enabled by laser-directed Sb2S3 phase transitions
Progress in metalenses: from single to array
30 years of nanoimprint: development, momentum and prospects
Research progress on generating perfect vortex beams based on metasurfaces
High fiber-to-fiber net gain in erbium-doped thin film lithium niobate waveguide amplifier as an external gain chip
Eco-friendly quantum-dot light-emitting diode display technologies: prospects and challenges
Operando monitoring of state of health for lithium battery via fiber optic ultrasound imaging system
Integrated photonic polarizers with 2D reduced graphene oxide



Previous Article                                Next Article
About
|
Contact
|
Copyright © Hot Paper