{332}<113>Twinning transfer behavior and its effect on the twin shape in a beta-type Ti-23.1Nb-2.0Zr-1.0O alloy
{332} <113>ベータ型Ti-23.1Nb-2.0Zr-1.0O合金の双晶転移挙動と双晶形状への影響
{332}<113>베타형 Ti-23.1Nb-2.0Zr-1.0O 합금에서 쌍정 전이 거동과 쌍정 형상에 미치는 영향
{332} <113> Comportamiento de transferencia de hermanamiento y su efecto en la forma de gemelo en una aleación de tipo beta Ti-23.1Nb-2.0Zr-1.0O
{332}<113>Comportement de transfert du jumelage et son effet sur la forme du jumelage dans un alliage Ti-23.1Nb-2.0Zr-1.0O de type bêta
{332} <113> Поведение двойникового переноса и его влияние на двойниковую форму в сплаве бета-типа Ti-23.1Nb-2.0Zr-1.0O
Yi Yang 杨义 ¹, Bohua Zhang ¹, Zhichao Meng 孟志超 ², Lei Qu ³, Hao Wang 王皞 ¹, Sheng Cao ⁴, Jianan Hu 胡嘉南 ¹, Hao Chen ¹, Songquan Wu 吴松全 ¹, Dehai Ping ⁵, Geping Li 李阁平 ², Lai-Chang Zhang 张来昌 ⁶, Rui Yang 杨锐 ², Aijun Huang 黄爱军 ⁷
¹ School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
中国 上海 上海理工大学材料科学与工程学院
² Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
中国 沈阳 中国科学院金属研究所
³ Northwest Institute for Non-ferrous Metal Research, Xi'an 710016, China
中国 西安 西北有色金属研究院
⁴ School of Materials, University of Manchester, Oxford Road, Manchester M139PL, United Kingdom
⁵ National Institute for Materials Science, Sengen 1-2-1, Tsukuba 305-0047, Japan
⁶ School of Engineering, Edith Cowan University, 270 Joondalup Drive, Joondalup, Perth, WA6027, Australia
⁷ Department of Materials Science and Engineering, Monash University, Clayton, VIC 3800, Australia
Journal of Materials Science & Technology, 20 November 2021

The interaction between twins and grain boundaries (GB) has an important influence on the deformation and fracture behavior of materials. In the present work, {332}<113> twinning transfer (TT) behavior and its effect on the twin shape in a deformed β-type Ti-23.1Nb-2.0Zr-1.0O Ti alloy were investigated experimentally and with molecular dynamics simulation.

The crystallographic alignment factor of the two twinning systems in the neighboring grains and the misorientation angle of the grain pairs were found to influence the occurrence of TT. This further determines the twin shape: twins present a ruler shape when TT occurs but are in a lenticular shape otherwise. Such different twin shapes are attributed to the local stress states related to TT occurring or not. Both ruler-shaped paired twinning and lenticular twinning would provide effective mechanisms to release or reduce the stress concentration in front of the twin tips in different grain pairs.
Journal of Materials Science & Technology_1
Journal of Materials Science & Technology_2
Journal of Materials Science & Technology_3
Reviews and Discussions
Parametric study on the flutter sensitivity of a wide-chord hollow fan blade
Influence of aspect ratio and arrangement direction on the shear behavior of ellipsoids
Development of a double-layer shaking table for large-displacement high-frequency excitation
Effect of SiC Particle Size on Properties of SiC Porous Ceramics
Physical Layer Authentication in UAV-enabled Relay Networks Based on Manifold Learning
Risk assessment of fault water inrush during deep mining
Simvastatin Improves Outcomes of Endotoxin-induced Coagulopathy by Regulating Intestinal Microenvironment
Sound Insulation Performance of Pyramidal Truss Core Cylindrical Sandwich Structure
Coupling analysis of passenger and train flows for a large-scale urban rail transit system
Effects of minor B additions on tensile strength, fracture toughness and oxidation resistance of Nb–Si based alloys
Essential role of MALAT1 in reducing traumatic brain injury
Seasonal Cumulative Effect of Ural Blocking Episodes on the Frequent Cold events in China during the Early Winter of 2020/21

Previous Article                                Next Article
Copyright © Hot Paper